Tag Archives: VMS map folio

The Portal Gate

http://civilwarbummer.com/templates/beez3/alfacgiapi 25 March 2020

discernibly In medieval times, people walked. Many cities were completely walled and you entered by the portal gate. Some cities had only one entrance. Some had three or four. If there was only one, it was important to know where it was or you could approach from the wrong side and spend hours or days backtracking along treachorous mountainous paths or deep forest.

To make it easier to recognize the gate from a distance, certain “signal” styles were adapted by builders and architects, many of which were specific to their region. It was common to build a tower, or a pair of towers, over the main portal. The extra height let the watchmen see who was coming, and visitors knew where to approach.

Example of travelers approaching the main entrance to a walled medieval city by spotting the distinctive portal gate.
Medieval portal entrances were designed with distinctive features and usually stood higher than the walls so watchmen could scan incoming traffic from a suitable height, and travelers could find the right entrance to walled cities. [Source: Eidgenössische Chronik, Cod. ZF 18, c. 1520s]

Portal-Tower Architecture

Most towers were built with brick and mud or stone according to local engineering and cultural traditions. Some had flat platforms, others had roofs.

The Canaanite Gate in Tel Dan is several thousand years old and currently under restoration (the doorway has not been fully excavated). It features a heavy wall and a single portal in the central recessed portion of a thick wall. The portal is within a broad arch that predates Roman arches by about 1,500 years. There may have been a higher central tower above the doorway at the time of original construction:

The ancient city gate called the Canaanite Gate or Abraham's Gate
The mud-brick Canaanite Gate in Tel Dan was built almost 4,000 years ago and features a thick wall, a higher portion above the portal (perhaps the remains of a tower), and an arched door-support. [Source: Hanay, Wikimedia]

This basic format, a strong wall, a central portal, and a raised platform or tower over the doorway was common to many countries.

There are a number of ancient gates in Bosra, in southwest Syria. They typically have arched doorways, but high towers above the gate are not usual.

The Gates of Istanbul are massive, with mostly-square towers, and very old. Some have been bricked up or restored over the years. This is the Belgrade Gate which still includes parts of the original wall:

Portions of the wall ran along the water and a chain was stretched over the canal to prevent undesired entry by boats.

Here are two examples of medieval tower portals from Cairo, Egypt. The well-fortified north-facing portal (left) has a platform and crenellations. The south portal (right) has elaborately carved minaret towers and stone roofs with sculptural finials:

The north and south gates of the old city of Cairo, Egypt.
The north-facing portal and south portal to the city of Cairo were built in two different styles in the 11th and 12th centuries. [Sources: Sailko and JMCC1, Wikipedia]

The bastion style on the left was a common style. It was designed for visibility and also for protection. It enabled guards to drop arrows, rocks, and burning oil onto anyone trying to storm the gate. This form of tower is often depicted in manuscript illuminations.

The Porta Soprana of Genoa, built in the 11th 12th century, is similar to the north-facing portal in Cairo, although not quite as massive. Between the two round towers, and on the top, are Ghibelline merlons, but it’s difficult to determine exactly when they were added. It is possible, in this case, that they are original, since this is one of the pockets where there were Ghibelline supporters, but since the portals were intended, in part, to assert the independence of Genoa, it’s questionable whether they would include a symbol specifically supporting the Holy Roman Empire:

The Porta Soprana portal in Genoa, built in the 12th century. [Source: Maurizio Beatrici, Wikimedia, 2016]

The little town of Münchenstein, on the northern Swiss border, had quite a simple portal with a square tower and crenellations:

The Augustus Arch, portal to Rimini, is very ancient and classical in design with an unusually large opening that probably never had a gate. The Ghibelline merlons were added in the 11th 10th century when the Ghibelline family took control of the city:

The Augustus Arch was originally built in the 1st century BCE and dedicated to Caeser Augustus by the Roman Senate. In the 11th 10th century, the Ghibelline merlons were added by the Ghibelline family. [Photo: Tobabi1, Wikipedia]

Gable Roofs

Sometimes towers had roofs similar to those on houses. A common style was the gable roof, seen in areas where ceramic or wooden roofs were added:

Examples of basic gable roof styles for buildings and towers
One of the roof styles used for medieval portal towers is the gable roof. In certain regions, the two ends of the roof-span sometimes included globe finials or flag finials.
Antique saddle with raised pommel and cantle [Source: The Met]

The span of a gable can vary. If it is a short-spanned gable with finials or raised peaks at either end, it is sometimes called a “saddleback” because of the resemblance to saddles with raised pommels and cantles (right).

Saddlebacks were common in Bohemia/Bavaria, Alsace, and parts of eastern France in the Middle Ages.

Historic Portals

The Butcher’s Tower (below) is a hip-style gable with inward-sloping sides and roofing materials on all four sides.

This picturesque watchtower was built in the 14th century, and stands above an entrance gate in a long wall.

Hip Gable "saddleback" roof on the Butcher's Tower, 1349, Ulm, Germany
Hip-gable style of “saddleback” roof with globe finials. The Butcher’s Tower, 1349, Ulm, Germany.

A similar style of portal can be seen in the Berner Chronik (Burgerbibliothek Mss.h.h.I.1), created between 1478 and 1483. It has a hip-gable saddleback roof with finials:

Example of a saddleback portal tower with finials in the Berner Chronik, created c. 1480.

The main difference between this and the Butcher’s Tower is that the Berner Chronik portal has a crenellated level where the stone ends and the roof begins. In some cases, towers started out unroofed and roofs were added later. In other cases, there is a crenellated balcony at the apex of the stone that was part of the design.

In this illustration, there are two entrance portals built along the water for accessibility by boat and for extra security. Both portal towers have saddleback roofs with globe finials, but the tower on the left has a viewing window and the one on the right has a covered walkway leading to the opening:

Examples of two forms of saddleback portal towers in the 15th-century Berner Chronik, c. 1480.
Two portal towers leading to the city, entered by crossing bridges, one plain, the other covered. Both have hip-gable roofs with finials. The arch-shaped extensions are similar to those on the Butcher’s Tower. [Source: Amtliche Berner chronik, Mss.h.h.I.1, c. 1480]

Postscript 29 March 2020: I forgot to add the following drawing when I posted this blog, but it’s worth including because it’s part of an extensive collection of town maps from the mid-15th century. The drawings of Guillaume Revel are generally more accurate than castle drawings in storytelling manuscripts because part of his purpose was to document ducal holdings.

Revel drew the town of Feurs around 1450. There are four saddleback portals, each with flag finials and, unlike most castle drawings, he included details of the archways and balcony just below the rooftops, a style that was fairly common in this area but not always elsewhere. Between the portals are semicircular wall towers with simple battlements:

The town of Feurs, France, documented in the 1450s by Guillaume Revel.
The walled town of Feurs in the 15th century is drawn here with four saddleback portal gates with flag finials. This detailed drawing was created as part of an armorial record by Guillaume Revel [source: BNF Français 22297]

The following examples of German towers include 1) double towers, one with a hip-gable saddleback on the left and a cone-shaped tower on the right, 2) a single tower with a saddleback roof and globe finials, and 3) a finial-topped cone tower surrounded by a balcony with battlements:

Examples of medieval portal tower styles.

The Prague “Powder Tower” is situated on one of the main city portals on the Charles Bridge. During the reign of Emperor Rudolph II, it housed some of the alchemists

It has a hip gable with globe finials and turrets in the corners, similar to the tower in the center diagram above, but the Powder Tower was not built until 1475 and I couldn’t find any clear pictures of the original tower it replaced.

Towers similar to the Powder Tower served as portals to the cities of Batteheim and Ensißhein.

Sometimes local architecture was used to illustrate events in far-off places. For example, Vatican Pal. Lat. 871, includes a biblical story of Ezechiel that obviously didn’t take place in central Europe, and yet the illustrator drew local architecture, including a pair of flag finials facing outward:

Manuscript Vatican Pal. lat. 871 illustration of a portal gate with flag finials.

On a side note… outside Ensißhein a meteorite boomed out of the sky and landed in a field November 1492. A number of woodcuts and drawings commemorating the event show a saddleback portal gate (a 15th-century drawing of Belgrade includes similar-looking portals):

Ensißhein (now Ensisheim) was immortalized in story and images in 1492 when it was struck by a meteorite. Citizens quickly started hacking off pieces, but an official intervened and preserved it for future generations.

Albrecht Dürer created elaborate allegorical engravings of the meteorite event replete with sun, moon, stars, cloudbands, angels, and people cowering in fear. Here are two examples:

Ensißhein meteorite event allegorically interpreted by Albrecht Durer
Albrecht Durer engraving of a meteorite event near Enseßheim that occurred in 1492.

Ensisheim is in eastern France, near the Swiss and German borders and I was intrigued by a more humble drawing of the meteorite event. People are pointing, birds are knocked out of their flight by the boom from the “thunderstone”, and animals scurry for their dens:

Meteorite falling to earth at Ansißhein in eastern France in 1492.
Meteorite blasting out of the sky with a loud boom, causing chaos November 1492 in the environs of the city of Ensißhein. [Courtesy of the Vatican Observatory Foundation, BAV Chigi G.11.36]

This illustration reminded me of the full-page drawing in the VMS that has multiple textures and emanations seemingly shaking the foundations of the earth. There is a person hiding or peeking out from behind a tor, a bird flapping by a cloudlike formation in the upper-right and another with wings raised as if to fly sits on the tor below.

I’ve already blogged about possible interpretations of this folio, and the Ensißhein meteorite event is probably too late to have influenced the VMS, but the fact that the folio has a narrative feel, like the Ensesheim drawings, makes me wonder if it chronicles a natural or mythical cataclysm:

Voynich Manuscript folio 86v image of birds, cloudlike formations and tall tors
Beinecke 408, the Voynich Manuscript, folio 86v, courtesy of the Beinecke Rare Book & Manuscripts Library at Yale.

Another meteorite hit the earth near Basel, Switzerland, in the 16th century but I wasn’t able to find any illustrations of similar events before the Ensisheim meteorite. There are some earlier drawings of “comets”, however, and since the word “comet” was used rather imprecisely at the time, maybe some of these sitings were meteorites.

U. dall’Olmo, in the Journal for the History of Astronomy, 1978, Vol. 9 searched medieval records for celestial events and describes a spectacular meteor shower in southern Italy in 1387 that was said to light up the sky. Three decades later, a meteor appeared after sunset and split into three while traveling west to east. If the VMS drawing has anything to do with meteor events, maybe it chronicles something earlier than the thunderstone of Ensesheim.

More on Portal Gates

Helpoort entrance portal by Ben Bender, Wikimedia Commons
Helpoort portal, photo by Ben Bender, Wikimedia Commons

Getting back to portal gate designs… the Helpoort gate in the Netherlands is a 13th-century entrance portal with an arched entrance, two round towers, and an asymmetric cone-shaped roof. I don’t know how old the finials are (they tend to wear and be replaced) but globe and flag finials were common in the middle ages.

In the 17th century, Reims was drawn with two saddleback portal gates flanked by a pair of round towers with cone roofs. A series of round towers, some roofed, some not, are spaced at intervals along the city wall.

When Adam and Eve are driven from Paradise in this manuscript from Switzerland, we see them exiting through the portal gate roofed with a hip gable and two flag finials:

Manuscript illumination, Adam & Eve driven from Paradise through a saddleback portal tower with flag finials.
Adam and Eve driven from the walled garden of Paradise through a traditional portal gate with a hip gable roof with a pair of flag finials. [Source: Bern, Burgerbibliothek Cod. A 45, c. 1480]

Roofs in the VMS “Rosettes” Folio

There are a number of corner towers and portal towers on the VMS “map” folio. The drawings are very tiny but still recognizable. The roofs are consistent with the styles of the towers and with each other.

On the lower side of the top-right rosette, there is a simple square tower facing the rosette, but the tall tower is probably also a portal tower that faces the pathway on the other side (imagine standing on the rosette and looking toward the “path” as though you are seeing it from the back). The central tower roof is a gable with flag finials facing outwards, a typical saddleback, flanked by cone roofs with globe finials (I think the finial on the right is probably a smudged globe finial, but it may possibly be a flag finial):

On a circular wall within the rosette, possibly at the top of a steep area, there is another saddleback tower apparently attached to the wall, but it doesn’t appear to have a portal opening. It may be a watchtower rather than an entry point.

This one has a hip gable and a pair of finials that are so small, it’s difficult to tell if they are flag or globe finials. If it’s a watchtower rather than an entrance tower, they are probably globe finials.

I think it’s very unlikely that the drawing below represents a lighthouse. Lighthouses were generally round and even if they were square near the bottom, as in some of the most ancient, the top was usually round so the signal fires could be seen from multiple angles. All through history, the majority of lighthouses were round or rounded (octagonal) at the top. Even the tower of Hercules transitions from square to octagonal to rounded as one reaches the top.

I have never seen a historic lighthouse with a saddleback roof and, in general, lighthouses were not attached to walls at the tops of hills. More often they were on prominences jutting out into the water closer at sea level, or they were on small islands or rock formations in or near the harbor. This looks like a typical wall-tower:

On the same wall, on either side of this tower, there are additional towers that appear to have cone roofs and finials. Moving to the left side of the rosette, facing another “pathway”, there is a wall castle or city with Ghibelline merlons, two unroofed towers, and a tall, narrow hip gable with finials:

Voynich Manuscript "map" folio showing saddleback towers and Ghibelline merlons, possibly on a steep hill.

Note also that the Ghibelline merlons are not on every side. The merlons on the left are the more common square merlons.

Pointed merlons are found in many areas of southern Spain, and if they are placed in pairs, they superficially resemble Ghibelline merlons, but they are not the same. The merlons on the VMS are straight on the outside and angled on the inside and join without reaching the base. The merlons in Spain are angled on two sides to create a different shape. There are some swallowtail merlons in Spain, but I haven’t found any that existed before the latter part of the 15th century.

Beyond this compound, to the left, there appears to be a walled pathway with buildings and towers at intervals. On the outsides of the walls are what appear to be steep escarpments, very similar in shape to certain geological formations and also similar to the escarpments created by mining operations. The buildings on the left look like houses and possibly a tower with finials. On the right is a platform tower with crenellations, possibly roofed. In the center is a faint tower with a cone roof that looks like it might have been partially erased:

Towers built into the walls above escarpments on the Voynich Manuscript "map" folio

Mining was quite extensive in the Middle Ages. Silver, gold, and other metals, along with desirable stones such as gemstones, granite, and marble, were so heavily mined that entire mountains were sometimes reduced to foothills. During the process, narrow terraces were often formed. This makes it difficult to know whether the lines that look like escarpments in the VMS are natural or manmade.

The next section in the top-left is quite detailed and it’s difficult to interpret the structures that appear to be inset into apparent hollows in the pathway:

VMS "map" folio tower in a hole and other architectural structures such as towers and buildings
Beinecke 408 Voynich Manuscript folio 86r foldout [Beinecke Rare Books & Manuscripts, Yale University]

The blue tower appears to be sitting on a steep tor with a spiral pathway to the top, and is colored to distinguish it from the structures under and around it. For this reason, I am reluctant to call the bumpy thing in the upper hole a building, as it is the same colors and textures as the “dirt” around the lower tower. My best guess at the moment is that the upper “hole” might be a cave entrance or a cutaway in a cliff as was sometimes created in the middle ages, with arched lookout points along the way.

Walls with Buildings

Walls with attached buildings were quite common in the Middle Ages. The way the path widens out where it appears to be steep is fairly common, as well, providing intermittent stopping places and viewpoints.

Tollhouses were installed at regular intervals on major rivers and paths, so the presence of a house attached to the wall might indicate a checkpoint or tollhouse.

At the bottom of the folio, we see a long wall of Ghibelline merlons, but no towers:

Long line of Ghibelline merlons at the base of the Voynich Manuscript "rosettes" folio.

This drawing of a wall in Constantinople, published 1580, has numerous attached towers, but they are shown with flat, unroofed, crenellated tops:

Old paintings of Florence, Italy, have towers similar to those in the illustration of Constantinople, with the exception of one portal tower that includes a low-profile hip-gable roof.

This image of Nuremberg published in 1493 includes numerous cone- and gable-style roofs, several with globe and flag finials:

Detail of the city of Nuremberg with a variety of roof styles and flag finials.

Burgdorf was drawn very similar to Nuremburg, with a variety of gable- and cone-style roofs. Note the tall tower with the saddleback roof is plainly visible even though trees obscure the gate. The buildings on the hill have flag finials (perhaps more than actually existed at the time but which were not uncommon in Switzerland and can also be found in Thun, south of Bern):

Medieval Burgdorf city walls and portal tower.

The way the portal-style towers and gates are positioned in the VMS, at significant junctions between landmarks and pathways, makes sense in the context of the Middle Ages, a time when there were many walled cities.

Real or Mythical?

But are they real or mythical? Should they be interpreted as actual places?

The “tower in the hole” has always made me wonder if the illustrator were suggesting a link to the underworld. Oceanus was said to swirl around the earth in nine rings (there are nine circular “rosettes”), which hints at the possibility of myth. When Psyche planned to throw herself off a tower after Aphrodite gave her an impossible task, it was the tower that told Psyche how to get to the underworld and back without losing her life. Is the tower-in-a-hole a conduit between this world and the one below?

Summary

Saddleback portal with two round towers with cone roofs.

As can be seen by some of the examples in this and other blogs, illustrations of far-off places or mythical events were sometimes drawn with local architecture. The illustrators guessed, or simply drew what they knew. This means that the saddleback portals and Ghibelline merlons might not be literal, they could be symbolic, or simply familiar and thus easy to use.

Regardless of why they were chosen, the consistency among them suggests awareness of architectural styles that were common in the region stretching from Bohemia in the east and the Alsace and eastern France in the west, and from Bavaria in the north and Lombardy and the republic of Genoa in the south. If the “rosettes” folio is a map, it might represent this region and it might not, but even if it doesn’t, the illustrator chose elements that betray a specific familiarity with the southern portion of the Holy Roman Empire.

You might notice that the picture to the right has a saddelback portal flanked by two round towers with cone-shaped roofs, similar to the first VMS castle illustrated above. It could easily be a coincidence, but for the record, the image is from a chronicle of the crusades penned in the 1460s (Bibliothèque de Genève Ms. fr. 85).

J.K. Petersen

© Copyright 25 March 2020 J.K. Petersen, All Rights Reserved

VMS Hot Spots

20 May 2019          

I am fond of pyrotechnics and once kayaked out to see a giant fireworks display raining flames on the water.

It was risky. Powerboats with drunk pilots whooshed around me in the dark. To add to the adrenaline, sparks were landing on my shoulders and pfushed and sizzled against the kayak. They could have ignited my clothing or hair… but I loved the front-row seat.

If you can’t resist fireworks, imagine squinting into the middle of a diamond-studded vortex, sparks exploding all around you, with 8-foot swells lifting the boat closer to the blast. It’s awesome.

So it’s natural for me to want to find volcanoes in the VMS “map”. I’ve mentioned volcanoes numerous times on my blog and on the forum, have admitted that the Naples area is on my top-5 list of locations for the VMS “map” (it’s not my only idea, but it was the first region I studied in depth after a long investigation of the water-gardens at the villa d’Este). Recently, I wrote in more detail about volcanoes and mud vents.

Historical Precedent

The idea of volcanoes on the “map” foldout is not new. I took it for granted that many people probably saw them as volcanoes. A quick Google search as I was writing this blog brought up volcano references from 1996 and there are surely some older than that, considering there’s more than one rotum that could be interpreted as a volcano.

Rotum1 (top-left circle) looks like a mountain or gaping maw. Rotum7 (bottom-left), could be flows of water, but could also be flows of lava.

Similarly there are spewy mounds between the rota that might represent volcanoes or mud vents, but they might also be geysers or natural springs.

I’ve suggested Rotum3 might be the remains of a volcanic crater (e.g., the island of Nisida, which has a small crater-shaped harbor facing the sea, with remains of an ancient castle wall on the ridge).

I’ve also mentioned Vesuvius, the island of Sicily, and volcanic areas around Damascus, Azerbaijan, and the region around Ischia. Even though there are numerous possibilities, Naples is one of my favorites because it has ancient pools that potentially connect volcanic “hot spots” with thermal bathing.

Eruptions in the 14th and 15th Centuries

In 1302, there was a “spatter cone” eruption on Ischia (you can see a debris field to the lower right on this old map labeled “Locus terribilis…”):

Ischia and volcanic debris field

In 1329, 1333, and 1381 Abraham Rees describes major eruptions of Mt. Etna. These kinds of events could have been handed down as oral or written history to the creator of the Voynich Manuscript. But are they reflected in the VMS “map”?

Cheshire One More Time (and Hopefully the Last)

Gerard Cheshire has based his entire “proto-Romance” linguistics solution around this very premise. In his recent paper he claims the VMS “map” documents a heroic rescue from a volcanic eruption.

In the previous two blogs, I commented on the linguistic flaws in his arguments. In this blog, I’ll quickly summarize his historical assertions.

Cheshire contends that nuns in the Castello Aragonese, off Ischia, wrote the VMS, and that the “map” documents the rescue from a 1444 eruption of Vulcano (in the Aeolian islands).

Other than the eruption, these ideas don’t seem to be supported by facts, …

I’ll continue looking, but I haven’t found any evidence that nuns lived on Ischia prior to c. 1600 or that they lived in King Alfonso’s Castello in the 15th century as Cheshire claims. The castle was built in 1441 just off Ischia, as shown in the diagram on the right. Cheshire writes that this is where the VMS originated.

The following timeline shows some key events related to Cheshire’s theory that appear to be at odds with his claims:

Timeline of key events in contradiction to G. Cheshire's timeline

Cheshire says that Maria of Castile organized a rescue from an eruption of Vulcano. The only rescue mission I came across was the liberation of Alfonso and his brother when they were captured in Naples. If any historian has evidence that Maria of Castile ferried victims away from a volcanic eruption in 1444, feel free to comment below.

As much as I like the idea, the interpretation of the VMS map as one or more volcanoes is problematic when applied to the Naples area. There are two sets of Ghibelline merlons on the VMS “map” that don’t mesh well with Naples. In the mid-15th century, this style of battlement was mostly confined to parts of what we now call northern Italy. For this reason, I have never committed fully to Naples and have continued researching the other possibilities on my list…

Lava and Lavage

Let’s assume for a moment that the various vents and flows on the VMS “map” are streams and sources of water, which may or may not have a volcanic source…

Picture of overhanging cave and bathing pool of San Filippo

One of my other favored locations is an area with numerous hot springs, including Bagni San Filippo, Bagnore, and Saturnia.

Of particular interest are the natural spring areas of Tuscany, such as San Filippo, where thermal pools, dripping foliage, and calciferous stalactite formations are nestled in a picturesque setting of rivers and woods—just the thing to inspire drawings of nymphly bathing and grotto-like archways and caves.

Some of the pools have calciferous walls that hold the water in step-like terraces. Others are ringed with stone walls that have been built and rebuilt for thousands of years.

Some pools appear bright blue, others green.

Sparkling calciferous pools in Bagni San Filippo [Detail courtesy of Il Vechhio]

Numerous waterfalls carve pathways through the rocks to feed the step formations:

Picture of VMS bathing pools with nymphs.

This by itself is not enough to connect San Filippo, Saturnia, or Monticiano hot springs with the VMS. There are thousands of hot springs throughout Europe, in Turkey, Germany, eastern Europe, several regions of Italy, and Sicily.

What interests me about the hot springs in Tuscany is that they are near a stronghold for Ghibelline sympathizers, which might explain the swallowtail merlons:

Pic of Ghibelline merlons on VMS "map"

Some people have suggested that the VMS pools might be color-coded for fresh or salt water. I think this is possible, especially if the pools represent something less literal than bathing pools. But, if they are bathing pools, maybe the colors represent hot or cold water. It was believed (and still is) that alternating between different temperatures can be therapeutic.

It was also believed that pools with certain temperatures and mineral balances were good for particular parts of the body, which might explain some of the drawings in the “bio” section. There’s no guarantee the different sections of the VMS relate to each other, but I’m hoping they do, because a holistic approach, on the part of the designer, appeals to me.

Moon-Shaped Medieval Castles

If the “stars” on Rotum3 (upper-right) are meant to represent water, then it’s possible it is a moon-shaped island with a castle at the top. It’s one of the reasons I think it could be an island in the Naples area. There are several crater-shaped islands, including Nisida.

In Greece, Santorini is similar (I’ve been there and if you scramble up Mesa Vuono mountain, you get a real sense of the vastness of the crater).

But if the “map” represents Tuscany, where would you find a moon-shaped island? This might be a bit of a stretch, but this 1664 map of Elba, an island off the coast of Tuscany, has a very interesting drawing of a moon-shaped castle-complex labeled Cosmopoli, with a man-made bridge connecting it to Elba. It’s not on a steep hill, like Nisida, but at least it has some of the characteristics of Rotum3:

Rotum3 isn’t necessarily an island, it might just be a stopping point on a strip map, but if it is an island, there are a few locations that could account for its distinctive shape.

Along the Pathway

Pic of ledges on Voynich Manuscript "map"

There’s another detail on the VMS map that can relate to Tuscany… on the pathway between Rotum2 and Rotum3 are some undulating ledges that look somewhat like dunes, possibly sand dunes.

If you turn them, however, so that the tower and wall are facing up, then they look more like solid escarpments.

They’re too steep and narrow to be vineyards, but they reminded me of something, something I couldn’t put my finger on at first…

Then one morning I woke up and remembered—marble quarries, the mountains of Carrara, pathways and ledges.

Here’s a photo…

Note the textural differences between the paths winding up into the mountains and the escarpments where the marble has been quarried in stepwise fashion.

We don’t know exactly how the quarry looked in the middle ages, but the mountains have been mined for hundreds of years, supplying marble for pillars, walls, mosaics, and classical statues that grace ancient buildings. Now marble is used largely for floor tiles and countertops.

It’s not a perfect match for the VMS drawing, but it does have a similar feeling, so maybe the “dunes” represent some pathway through mountains.

Summary

I can’t possibly cover every detail of the map in one blog, this is enough for now. Much of this I’ve mentioned before, but it illustrates that there are many ways to interpret the “map”, more of which I’ll cover in future blogs.

J.K. Petersen

© Copyright 2019 J.K. Petersen, All Rights Reserved